
Dirty spray-guns bogging down a smooth operation?
Waterborne material can be more difficult to clean, creating more complications than it solves, causing performance problems and corrosion in your spray–gun.
Take your spray-gun cleaning to the ultimate level utilizing the BECCA-developed, 3P System, Three Processes for Success.
BECCA’S 3P System delivers a high-level of cleaning, low operation cost and renders minimal waste generation–– returning your spray-gun to a like-new condition.
[Proper Disassembly/Assembly Of Paint Spray Guns]
What is 3P?
It stands for Three Processes for Success!
Process One: Begin with a detailed cleaning and polishing of your paint spray gun. This will get it back to a like-new condition. If your gun is new move on to Process Two.
Process Two: Now implement the BECCA cleaning system for primer/sealer, base coat, clear coat, or two-component materials or single-stage materials.
Process Three: Finishing up, select a waste management system that best handles the particular materials you are using whether waterborne, solvent, multi-stage, two-component, or single stage.
The BECCA 3P System takes Spray Gun Cleaning to the ultimate level. This system provides a long term solution that has:
- High Level of Cleaning
- If all steps of the process are followed then the gun will be like new all the time
- Very Low cost to Operate
- Low Maintenance costs
- Only uses a small amount of compressed air
- Very Low waste Generation
- Hazardous waste
- Regular Waste
BECCA’s 3P System provides an easy, and effective method for cleaning paint spray guns like no other competitive paint gun cleaner.
*Contact our team for more detailed information on this new system!

- Your Shop
- Look Familiar?
- 3P System
- Tools
- Knowledge HUB
- Videos
- Literature
Does This Look Like Your Shop?
BECCA found in its studies that the majority of painters (8 out of 10) are not using the Spray Gun Cleaners as intended:
- When failing use spray gun cleaner at all…
Such as cleaning their paint spray guns over a waste drum with a ketchup bottle! - Many use a paint spray gun cleaner that is not functioning properly, therefore the spray paint gun is not being cleaned properly. Therefore resulting in manually cleaning as before with a ketchup bottle.
- The Results, a poor performing paint spray gun and producing more hazardous waste!
The above cleaning processes provide poor results!

Does This Look Familiar?

Looks great on the outside How they look on the inside!

The BECCA 3P System was designed to provide a designed and tested process that delivers consistent cleaning of paint spray guns.
Process #1 – Clean & Polish
Dirty Spray Gun

Cleaned & Polished Spray Gun

Process #2 – The BECCA Spray Gun Cleaning System

Process #3 – Waste Management System
Solvent

Waterborne

The Tools
BECCA’s Tools make significant difference in the performance of the 3P System. Each tool has a specific characteristic that makes the cleaning process perform.

Does This Look Like Your Shop?
BECCA found in its studies that the majority of painters (8 out of 10) are not using the Spray Gun Cleaners as intended: